Description
Strong and durable finish – enamel colors are baked on.
Transitional design – works in modern or traditional setting.
Metal Bin Pull
in Die-Cast Zinc
Length: 3-3/4"
Center to Center (hole spacing): 3"
Projection: 1-3/8"
Product #29-503
Gloss White Enamel/Polished Chrome Finish
Specifications
Material: Die-Cast Zinc
Length: 3-3/4″
Projection: 1-3/8″
Center-to-Center (hole spacing): 3″
Warranty: 1 year limited warranty
Shipment Weight: 7 oz.
California Residents: WARNING: see Proposition 65 information
Included Hardware
includes (4) 8-32 machine screws, (2) 5/8″ & (2) 1-1/8″ long, depending on thickness of door/drawer
Product Care
- Use a soft, nonabrasive, slightly damp cloth for cleaning cabinet knobs/pulls and dry immediately. If your water contains higher than normal levels of salt or other chemicals, please used distilled water to dampen the cloth.
- Never use any abrasive materials such as steel wool or Scotch-Brite pads for cleaning. This can compromise the protective lacquer finish and void the warranty.
- Never use any cleaning agents with bleach or other chemicals that can remove the protective finish and cause the solid brass material to oxidize and discolor, which will also void the warranty.
- Warranty limited to one year from date of sale against defects in material or workmanship, under the intended use of the product. Our sole responsibility is to repair or replace defective merchandise.
Installation
- Position Bin Pull in cabinet face and mark holes to be drilled
- Using a 1/8″ bit, drill “pilot” holes through cabinet face where marked in step (1)
- Using a 1/4″ bit, drill 7/16″ deep into the “pilot” holes in order to recess the posts
- Attach Bin Pull to cabinet using screws provided
